To view violations by other categories, click on Building, Electrical, or Mechanical.

CPC Table 7-3 Note 2
Kitchen sink waste must be 2 inches minimum drain.

CPC 905.1
Kitchen sink vent has backfall.

CPC 905.1
Kitchen sink vent sanitary tee is reversed.

CPC 313.9
Plumbing must have protection plate.

CPC 314.4
Provide separation of dissimilar metal strap and piping.

CPC Table 7-5
Toilet vent must be 2 inches.

CPC 408.6
Toilet will not meet minimum 15 inches from center line to side wall.

CPC 314.5
Toilet flange must be supported.

CPC 310
ABS joints must fit correctly (workmanship).

CPC 314
Vertical runs of the ABS need to be supported.

CPC 314.4
Piping shall be isolated from incompatible materials.

CPC 316.1.1.2, 316.1.2.5, 316.1.3 Installation
Soldered copper to be cleaned.

CPC 704.4
Kitchen sink waste requires cleanout.

CPC 606.2
Copper water piping damage.

CPC 704.4.5
Corrosion resistant screws at water closet.

CPC 1002.4
Vent pipe opening not to be below weir of trap.

 

Building | Electrical | Mechanical